Mancino Inc Home About Mancino Inc Contact Mancino Inc
Fence Padding Post & Pole Padding Product Options Terms & Conditions
   Downloads   |   Certifications  |   Gallery



Fixed Stage Padding
                                                                            architectural specifications | shop drawing

Fixed stage padding is manufactured as a pre-fabricated corner using anyone of the standard foam
options from the fixed wall padding line of products, laminated to a 7/16-inch SFI® certified responsible
urea formaldehyde free recycled composite wood backer board, and covered in a 16 -oz. / sq. yd. vinyl
coated polyester, CPSIA - 6P and lead compliant.




REMOVABLE STAGE PADDING

724 Hinge Top Returns
                                                                        architectural specifications | shop drawing

724 Hinge top return stage padding is manufactured in a 2 ½-in- dual foam thickness on both face and
return.  Each mat is sewn with loop attachment along horizontal edge of return for connection to YKK®
engineered hook and rail system.  Base layer of 1 ½-in- polyethylene foam and a top layer of 1” high
impact polyurethane foam. This stage padding option is built to cover an entire stage face resting firmly
on the floor provides superior protection for an often hazardous area.



FH Style Top Returns
                                                                          architectural specifications | shop drawing

FH style top return stage padding is manufactured of 1 ½-in- thick polyethylene foam filler on
both face and return. It comes in standard 4-ft- and 5-ft- lengths x 12-in- face and 12-in- return. 
Each section of stage padding is sewn with loop attachment along horizontal edge of return for
connection to YKK® engineered hook and rail system. This very simple design makes for great
protection in stages that padding is often removed, or stages that have cabinet doors below.

 



No Top Return
                                                                                       architectural specifications | shop drawing

No top return stage padding is manufactured in any one of the three primary removable wall padding
foam thickness options (1 3/8-in-, 2-in-, 2 ½-in-).  It is made in standard 2-ft- accordion style fold construction.
This pad is made to custom heights typically a minimum of 6-in higher than the top of the stage, and with the
option of standard removable padding loop or a separately sewn loop attachment along horizontal edge
for connection to YKK® engineered hook and rail system.  Stages that require this padding are those
that prefer to have to no padding on the stage return.